AUTOMATIC WATER LEVEL CONTROLER

RAPID SERVICES
AUTOMATIC WATER LEVEL CONTROLER & INDUSTRIAL APPLICATIONS

RAPID SERVICES : an innovative digitally controlled product gives you freedom from the
daily chore of switching on and off the pump.

Consisting of a master control electronic unit and two sets of sensing probes, one for the sub-tank and another for the overhead tank, Rapid Services continuously senses and monitors the water level in the sub and overhead tanks. Based on this, it signals the main electronic Unit for switching the monitor ON or OFF.

BENEFITS
SAVES WATER : RAPID SERVICES - saves precious water by avoiding overflowing of the
sump and the overhead tank by switching the motor ON and OFF automatically.
SAVES POWER : RAPID SERVICES - saves valuable power by avoiding motor overrun due to overflow of water and dry running of motor.
PROTECTS MOTOR : RAPID SERVICES- provides high and low voltage protection to the
motor and protects it from burn out due to high or low voltage.
DRY RUN PROTECTION : RAPID SERVICES - is programmed to switch off the motor
after the cut off time of 120 seconds in case of dry run.
AUTOMODE : Pump switches ON / OFF -Automatically as per the signals transmitted from
sensors in SUMP and Tank . Fuse (Load) Protects the pump from overloading and Short-circuits.
OFF MODE : Pump switches OFF. System monitors the water level in Sump and Tank.
MANUAL MODE : Pump switches On irrespective of water level in SUMP or TANK. This bypass the FUSE (LOAD). Select OFF MODE to switch OFF the pump.
MEMBRANE SWITCH NEED
(TRIGGER) / RESET : To switch ON the pump in auto mode. To RESTART thepump after rectifying dry running fault.

TECHNICAL SPECIFICATION
System supply voltage : 230 V 50Hz. AC
Sensing Voltage : 12V AC
Size : 170 mm X 150
mm X 60mm
( LxBxH)
Output Voltage : 140V 270 V
Dry rub trip delay : 120 seconds
APPLICATION RAPID
SERVICES IS SUITABLE FOR :
S House S Office S Apartments
S Commercial Complex S Hotel
S Hospitals etc.,

Contact

e-mail : rapid_services2007@yahoo.co.in